close
close
th 4061

How Do You Program A Ford Transponder Key Without The Original

How Do You Program A Ford Transponder Key Without The Original. Without the chip in the key, the car will not start. That is, 10 minutes and 30 seconds.

Keyless Remote and Transponder Chip Ignition Key Ford F
Keyless Remote and Transponder Chip Ignition Key Ford F from www.ebay.com

May you program the ford key yourself? Without the chip in the key, the car will not start. Next you need to turn the key clockwise from the “off” position to the “on” position.

To Start With, You Will Take Off The Back Cover Of The Battery Compartment By Unscrewing The Cap.

You can repeat this for up to 8 keys total. Once you get the security alert, you need to wait 15 minutes before proceeding. Programming a new original key will disable any old master key.

Turn The Ignition To On And Keep It On For About 10 Minutes And 25 Seconds.

You should see that the security lights turn on. Enter your vehicle with two of your programmed keys and the new key you are yet to program. Once you have programmed it, you can only use a set key to start.

Most People Don’t Know That They Can Program A Ford Key Without The Original.

Get inside your car and enter the transponder key inside the ignition of your car. Firstly, insert the new (unprogrammed) cut transponder key in the ignition. Have the new master key cut so that it matches the original.

Slot In The First Programmed Key In The Ignition.

Here are the steps you should take to program an additional ford key: How expensive are transponder keys? Turn on the electric lock;

In A Similar Way As Step 2, Rerun The Procedure And Put The Transponder Key In The “Off” Position Again In 45 Seconds.

Again, get to the “off” spot and put it back to the “on.” spot as well. Without the chip in the key, the car will not start. Remove the original key from the ignition cylinder.

Related Posts

Leave a Reply

Your email address will not be published.